NATURAL SOAP
PRODUCT INFORMATION
F 14.2
F 14.2
GENERAL DESCRIPTION
Use Natural Soap for regular cleaning of soap and oil-treated wooden floors as well as for protection of lye-treated surfaces.
Natural Soap seals the open pores of the wood, thus giving the floor a light protection against dirt and liquid penetration.
Natural soap is available in three variants. Use the Clear version for dark coloured wood species and White or Extra White for lighter woods.
For professional and home use.
PRODUCT DESCRIPTION
Package size:
Clear: 2½ Litres.
White: 2½ Litres.
Extra white: 2½ Litre.
Ingredients Natural Soap, clear:
Water, CAS No. 7732-18-5 (AQUA)
Fatty acids, soya, potassium salts, CAS No. 61790-24-7 (POTASSIUM SOYATE)
Fatty acids, coco, potassium salts, CAS No. 61789-30-8 (POTASSIUM COCOATE)
Ingredients Natural Soap, white and extra white:
Water, CAS No. 7732-18-5 (AQUA)
Fatty acids, soya, potassium salts, CAS No. 61790-24-7 (POTASSIUM SOYATE)
Fatty acids, coco, potassium salts, CAS No. 61789-30-8 (POTASSIUM COCOATE)
Titanium dioxide, CAS No. 13463-67-7 (TITANIUM DIOXIDE)
TECHNICAL DATA
Coverage: 50-100 m² per litre.
pH: Concentrated approx. 10. Diluted approx. 9-10.
Before application: Shake the can well before use.
Application tools: Cloth or flat mop.
Substrate temperature: Minimum 15 °C.
Storage: Lasts for 3 years if unopened and stored at 20 °C. Not to be exposed to temperatures below 0 °C.
DIRECTIONS FOR USE
Always use a well-wrung cloth or mop and remember that a wooden floor does not tolerate soaking. Any water spillage must be wiped up straight away so as to avoid water damage.
Regular cleaning:
- Sweep or vacuum the floor to remove dirt and grit.
- Mix 250 ml Natural Soap with 5 litres of warm water.
- Wash the surface along the direction of the floorboards and woodgrain.
- If the floor is very dirty, you can work with two buckets, one for clean soapy water and the other for wringing out the cloth.
- Particularly difficult stains can be removed with Junckers Intensive Cleaner.
Finishing of lye-treated wood:
- 1 litre of Natural Soap is mixed with 10 litres of warm water.
- To saturate the wood, wash the floor three times in two days.
PRECAUTIONARY MEASURES
Before using the product, read the label on the container carefully and observe the recommended precautionary measures. See Material Safety Data Sheet for detailed information.
FURTHER INFORMATION
Products:
F 14.3 - Junckers Intensive Wood Cleaner
F 14.5 – Junckers Softwood Lye